Pushbutton Teach with Fine Adjustment
Powerful RGB and color mark sensor that is easy to set-up and adjust parameters. Digital display provides at a glance information for set-up and trouble shooting. Fine tune adjustment makes for an excellent low cost color and mark sensor.
RGB Color Mode
When detecting a specific color, a three color RGB LED element is used. The sensor computes the color ratio between the three colors. The accuracy of the color detection is assured with products moving on a conveyor.
Mark Detection Mode Provides Automatic Choice of RGB Light Source
The DM-18T has a red, green, and blue Led light source built-in, the microcomputer will select the proper one to use according the specific target color.
|DM-18T Series Specs|
|Sensing Mode||RGB Color / Mark Sensor|
|Operation Voltage||10 to 30VDC|
|Storage Memory Banks||8 Banks|
|Light Source||RGB (Red, Green, Blue LED)|
|Sensing Distance||18mm ±2mm|
|Beam Spot Size||1x6 mm at 18mm|
|Digital Display||7 Segment 3 Digit Red/Green. Memory Bank, Light Level, Threshold|
|Adjustment||Pushbutton Teach w/Fine Adjust|
|Response Time||RGB Color Mode: 800µs, 1600µs, 4000µs. Mark Sensing: 250µs, 500µs, 1200µs|
|Timing||Programmable Off-delay, On-delay, One-shot.|
|Temperature||-25° to +55° C|
|Connection||2m Cable (6 conductor)|
|Includes||BEF-WK-190 Mounting Bracket|
Optex DM-18TN(E) RGB Color Sensor NPN 2 Meter Cable Type
- Manufacturer: Optex FA
- Part #: DM-18TN(E)
- Availability: 7