Ask the Experts: 1-800-280-6933
Fanatical Customer Support
Fanatical Support
Quality Products
Quality
Products
Expert Engineers Just a Call Away
Engineers a
Call Away
Over 50 Years Experience
Over 50 Years Experience
Same Day Shipping
Same-Day Shipping *

To order from our new and improved store please visit
https://www.ramcoi.com/itemdetail/TD1-010M8

Edge Position Measurement Thrubeam Sensors

The TD1 series is ideal for equipment where edge control is required, such as for measurement of the end surfaces of components or sheet materials. The TD1 sensors use a CMOS sensor as the light receiving element, allowing for highly accurate edge position measurement of end surfaces.

Up To 300mm Measurement Range

Up To 300mm Measurement Range
In direction checking mode, the indicator will flash when the light axis is misaligned, notifying that the alignment should be checked. This makes it easier to check the light axis when installing sensors or during periodic maintenance.

Repeatability: ±5μm - Linearity: ±0.4% of F.S.

Easy Light Axis Alignment

Easy Light Axis Alignment
In direction checking mode, the indicator will flash when the light axis is misaligned, notifying that the alignment should be checked. This makes it easier to check the light axis when installing sensors or during periodic maintenance.

Compact Design

Compact Design
The compact size of the sensor head allows for easy installation even for devices with limited space. This makes it possible to keep equipment as small as possible.

Width/Gap Measurement

Width/Gap Measurement
The measurement method used in a TD1 series product can be changed to suit the inspection application, such as when measuring the width of small electronic components or the gaps between rollers.

TD1 Specs
Measurement Range ±5mm (Edge)
Measurement Width (mm) 10
Light Source Red semiconductor laser, 660 nm wavelength 390µW
Sensing Range (mm) 300
Conforming Standards / Regulation Class 1 (IEC/JIS)
Spot Size 3 x 14mm
Minimum Detectable Object
Linearity ±0.4% of F.S. at 100mm separation
Repeatability ±5µm
Sampling Period 500µs
Temperature Drift ±0.02% of F.S. / ° C
Indicators Emitter head: Green (power) Light receiving head: Green (power) Red (alarm)
Digital Output Use CDA Controller
Analog Output Use CDA Controller
Serial Interface RS-485
Supply Voltage 12-24VDC ±10%
Current Consumption Emitter: 20mA Light receiving head: 80mA (at 12VDC)
Connection Type 300mm pigtail with M8 4P molded connector
Ambient Temperature -10 to +50° C no freezing or condensation
Ambient Humidity 35 to 85% RH
Ambient Illuminance Sunlight: 10,000 lx or less. Incandescent lamp: 3,000 lx or less
Vibration Resistance 10 to 55 Hz; double amplitude 1.5mm; 2 hrs in each of the X, Y, and Z direction
Shock Resistance Approx. 50 G, 3 times in each of the X, Y, and Z direction
Enclosure Protection IP50
Material Aluminum die cast housing, glass emitting and light receiving lens.
Weight (lbs) 0.15
Includes TDCN-Y2-M8 Y branch cable

Optex FA TD1-010M8 Thrubeam Edge Sensor - NEW!

  • Manufacturer: Optex FA
  • Part #: TD1-010M8
  • Availability: Order Now, Call for Lead Time
  • $1,250.00


Related Products

Optex FA CDA-DM Controller with Dual Analog Outputs

Optex FA CDA-DM Controller with Dual Analog Outputs

To order from our new and improved store please visit https://www.ramcoi.com/itemdetail/CDA-DM Displ..

$710.00

Optex FA TDCN-Y2-M8 Y Branch Cable for M8 QD - 2 Meter

Optex FA TDCN-Y2-M8 Y Branch Cable for M8 QD - 2 Meter

To order from our new and improved store please visit https://www.ramcoi.com/itemdetail/tdcn-y2-m8Op..

$200.00